Pressure Transducer with Display_6003687_Normal Module
Pressure Transducer, DP2
The DP2 series is the new generation of pressure gauges in the field of pressure measurement technology.
Microprocessor-controlled devices
Measuring in overpressure and vacuum range
All functions can be programmed conveniently using front buttons
LED display for displaying functions and measured values
Analogue output with 0.1% resolution
Units freely selectable
Zero alignment
Two adjustable limit values with switching output and LED indicator
Flat design for wall mounting
Standard design for direct and front panel mounting
Accessories
MS-DPX mounting clips for floor attachmentMS-DPX-2 front installation assembly kit (not for flat design, only standard design)
DPX-04 dust protection cover for MS-DPX-2
| Flat design: | DP2-40E | DP2-41E | DP2-42E |
| Standard: | , | DP2-21P | DP2-22P |
| , | Vacuum | Overpressure | Overpressure |
| Pressure range: | 0 → -1.01 ,bar | 0 → 1 bar | 0 → 10 bar |
| Reading display: | LED 3 1/2 ,digits | , | , |
| Resolution: | 0.1% of display | , | , |
| Overpressure-resistance: | 4.9 ,bar | , | 14.7 ,bar |
| Measurable gases: | Non-corrosive | , | , |
| Hysteresis: | 1 digit | , | , |
| Response time: | 2.5 ,ms | , | , |
| Transistor output: | PNP max. 100 mA | , | , |
| Analogue output: | 1 → 5 ,V | , | , |
| Power consumption: | 50 mA | , | , |
| Housing material: | Plastic | , | , |
| Protection rating: | IP40 | , | , |
| Dimensions: | 44.7x30x35 ,mm | , | , |
| Pressure connection: | G (PF) 1/8 | , | , |
| Supply voltage: | 12 → 24 ,Vdc | , | , |
| Temperature-dependence: | -10 °C → +50 °C | , | , |
