Relay,coupling,24Vac/dc,manual control,check back function

Mã sản phẩm: 170010R

Hãng sản xuất:

Hết hàng

Giá: Liên hệ

Mô tả sản phẩm
Bình luận

HAR1 Interface Relay - 3 Function

This switch may be set to be permanently ON or OFF, or set to AUTO.

Check-back signal of the switch setting AUTO
Function settings: AUTO (automatic), 0 (permanently OFF), HAND (permanently ON)
LED status indication: Yellow LED ON/OFF; indication of relay output

Mechanical Design
Protection	Self-extinguishing plastic housing, IP40
Mounting (any position)	DIN-Rail TS 35 according to EN 5022
Shockproof Terminal Connection According to VBG 4	(PZ1 required), IP20
Mechanical Life	20 x 10⁶ Operations
Electrical Life	2 x 10⁵ Operations at 1000VA Resistive Load
Ambient Temperature Range	-25 to +55°C (according to IEC 68-1)
Dimensions	H87mm x D65mm x W17.5mm
Electrical, Input Circuit
Supply Voltage	24ac/dc Terminals A1(+)-A2
Signal Voltage	24Vac/dc Terminals A3(+)-A2
Tolerance	- 15% to +10%
Rated Frequency	48 to 68Hz
Rated Consumption	0.5VA (0.5W)
Duration of Operation	100%
Residual Ripple for DC	10%
Drop-out Voltage	10% of Supply Voltage
Electrical, Output Circuit
Contact Configuration	1 potential-free Changeover Contact
Switching Capacity (distance <5mm)	1250VA (5A/250Vac)
Switching Capacity (distance >5mm)	2000VA (8A/250Vac)
Switching Frequency	max. 60/min at 100VA resistive load max. 6/min at 1000VA resistive load (according to IEC 947-5-1)
Insulation Voltage	250Vac (according to IEC 664-1)
Check-back Function
Position ’AUTO’	Terminals B1-B2
Maximal Switching Capacity	24VA (500mA / 48V AC/DC)
Minimal Switching Capacity	5mVA (1mA / 5V AC/DC)
Contact Resistance	Max. 20mΩ
Electrical Life	32 x 10⁴ operations at maximum load