Photo Sensor, retro-reflective Sr 100mm
Mã sản phẩm: E3T-SR42-S 2M
Danh mục:Cảm biến quang
Hãng sản xuất:
Detection Range=10 to 100 mm|Detection Type=Retroreflective without M.S.R.|Electrical Connection=Pre-Wired|Housing Material=PBT|IP Rating=IP67|Light Source=Red LED|Maximum Current=50 mA|Maximum DC Voltage=26.4V|Optical Technology=Phototransistor|Output Type=NPN|Response Time=1 ms|Sensor Style=Block
Hết hàng
Giá: Liên hệ
Retroflective
| Supply Voltage | 12 to 24Vdc |
| Light Source | Red LED |
| Max. Switching Current | 50mA |
| Max. Switching Voltage | 24Vdc |
| Output control | PNP or NPN open collector |
| Current Consumption | 20mA |
| Insulation resistance | 20MΩ min (at 500 VDC) |
| Response Time | 1 ms max. each for operation and release |
| Directional Angle | Emitter; 2° to 20° |
| Connection Method | Pre-wired 2m cable |
| Operating temperature | -25° to +55°C |
| Materials | PBT case, Polycarbonate lens and cover |
| Ingress Protection | IP67 |
Note
Set the distance between the sensor and reflector to a value larger than 10mm for a 200mm sensing distance
